Aviation Ground Support Equipment

To meet the diversified requirements of our prestigious clients, we are engaged in offering Common Rail Kit. Our offered water treatment equipment is extensively used in water treatment systems to remove turbidity and suspended solids from water. The pressure sand filters and activated carbon filters improve the filtration, and also remove any particulate matter left over after flocculation and settling. The offered range is manufactured using premium quality components under the guidance of experienced professionals. Clients can avail the Common Rail Kit in various specifications at reasonable prices. Tripod Jacks for lifting & bearing the load of Aircrafts.

Owing to our quality oriented professionals, we are engaged in offering Kerosene Recirculating Kit, which are widely used for casting piers for bridges. This product is designed and fabricated using premium quality materials and latest technology under the guidance of experienced personnel, in line with the defined quality standards. This product is highly appreciated for sturdy construction, corrosion resistance, accurate dimensions, reliability and longer life. Clients can avail these Kerosene Recirculating Kits at competitive prices.

2 S.S. 316 bullet (cylinder), with fluid capacity of 10 Ltrs. Each and total capacity 20Ltrs each. Connected to a common control panel. Also will be provided a pneumatic tank of high carbon steel to hold pressurized air to charge the system.  Pressure bearing capacity of each cylinder will be 10 kg/cm². The control panel will be made of m. S. And will be powder coated. Provided on the panel will be a pressure input non-return nozzle, individual pressure relief valve (adjustable), common pressure gauge of 0-10 kg/cm² reading. A directional output valve will be provided. A common pressure input valve with quick release coupling to connect to pneumatic hose will be provided. A two wheeled tow carriage with 10” hard rubber wheels. A vertical mounted control panel constructed in M.S. fixed on the trolley will be provided. The complete trolley will be powder coated.  There will be provided a single output on the control panel with two pairs of 5mtr. Spiral tube hose to connect to the engine. Rate of flow can be control by increasing or decreasing pneumatic pressure on the regulator provided on the panel. 

As a specialist of this industry, we offer a qualitative range of Helicopter Skit Holder that is manufactured at our sophisticated manufacturing unit using premium quality raw materials. Offered holder is used to hold helicopter's skit during transport. In addition to this, our quality experts check these on various quality parameters. Moreover, it is widely demanded by our esteemed clients, owing to their various features and cost-effectiveness.

 

Features:

 

• Optimum usage

• Perfect shape

• Rigid construction

We are a prominent manufacturer and supplier of Ground Power Unit, manufactured using premium-quality components and modern technology. Provided unit is a vehicle capable of supplying power to aircraft parked on the ground. Moreover, our offered unit is suitable for all aircraft to give power supply. Apart from this, our offered power unit is available with various specifications and customized options in accordance with clients' details.

 

Features:

 

• Multi functions

• User friendly

• Excellent performance

 

Specifications:

 

• It is provided with a tapered lid to cover the Ground Power Unit. box from above. 4 nos of 12" diameter

• Wheels are provided to cart the Ground Power Unit.

• A 250 v.a.c. 50 hz stepped down and rectified to 50 v.d.c. 10 amperes power supply provides in the front end of the Ground Power Unit.

We bring forth a wide range of Adjustable Base Jack that are precision engineered using the best grade material. Widely used in aviation industry as ground support equipment, these are known for their tensile strength, corrosion resistance and better durability.

Our range includes:

Common Rail Jack:

• These are available with common rail connection with hydraulic power pack that allows all three/four jack to simultaneously or individually lift or lower as per the degree required. The operator does not require to move around to operate each individual jack. This can be simply done from one location as all the controls are available on the power pack.

Individual Jack:

• These jacks are incorporated with individual hand pump and reservoir tank with oil capacity equivalent for one cylinder.

We have uniquely positioned ourselves as a reputed organization, engaged in offering a qualitative assortment of Compressor Wash Rig. Offered rig is designed and manufactured in compliance with international standards using best grade component. Additionally, it is available in various technical specifications and can be customized as per the specific requirements of the clients. Appreciated for optimum reliability and high durability, offered rig is highly demanded in the market.

 

Features:

 

• The cylinders are constructed of stainless steel

• For double cylinder cart the operator may choose from cleaning agent or water without interchanging the hoses from each engine

• The pressure bearing capacity of the system is upto 150 P. S. I

• The frame for the double cylinder carts are constructed of steel with 2 Wheels and our epoxy powder coated

• On our double cylinder wash right output pressure can be regulated

• One valve is provided per outlet

• On each outlet is provided mesh filters

Leveraging on our vast industry experience, we are providing Battery Cart that is designed and fabricated using high grade components and allied raw materials under the guidance of skilled professionals. This rubber reclaim machinery is extensively used in the rubber industry for high temperature and high pressure cooking of rubber crumbs and to recycle the same in to rubber sheets. Our offered product is highly appreciated for its robust construction, high efficiency, corrosion resistance, fine finish and longer service life. This Battery Cart is available at the most competitive price.

For checking of hydraulic system without engine power. Manufactured from top grade material and precision engineered as per the latest technology, these products are in compliance with international standard and best serve the requirements of our clients. Besides, customers can avail these products at industry leading prices.

We are remarkable entity, engaged in offering high quality Engine Wash Cart. The offered wash cart is manufactured by our proficient professionals from superior quality components and the latest technology in adherence with industry standards. In order to maintain the quality, this wash cart is tested on different quality parameters. Moreover, this wash cart is available in various sizes,designs and specifications.

Features:

• Easy to operate
• Rugged construction
• High performance

For checking of hydraulic system without engine power. Manufactured from top grade material and precision engineered as per the latest technology, these products are in compliance with international standard and best serve the requirements of our clients. Besides, customers can avail these products at industry leading prices.

We are the leading manufacturer and supplier of Starter Generator Brush Bedding Table with fine quality. Our offered beeding table is manufactured using premium quality components and high technology machines. Provided table is widely used in various engineering and construction industries for specific applications. The offered table is checked under the supervision of our experienced quality professionals, in order to ensure flawless supplies at our client's end.

 

Features:

 

• Easy to operate

• Simple Maintenance

• Reliable performance

 

Specifications:

 

• The machine consist of a mild steel angle frame bed of size: 48"length x 32"breadth x 3 ' height

• On the table is mounted a wooden plank 1" thick covering the whole table top on which is fixed a 1/2 hp. p.m.d.c motor

• The motor has a speed controllable from 0 to 500 rpm

• Under the table is provided a panel board to house a digital rpm.

• meter (upto 999 rpm)

• A digital volt meter to measure the output of the starter generator and a speed controller for the motor the rpm

• The motor is connect to the starter generator by a nylon rigid coupling

• To hold the starter generator is provided a round clamp fastened on the table

• For the safety of the operator is provided a guard on the rigid coupling

• All the mild steel parts is powder coated and the wooden plank is covered with wood fin (poly urethane) paint